FBM215輸出個性模塊,FBM215中文PDF用戶手冊
執(zhí)行預防性維護的人員應滿足以下資格。
?維護人員應是合格的電氣技術人員或工程師，了解測試設備的正確使用以及如何處理電子電路。
?維護人員應知道汽輪機停機以及啟動和工廠操作程序。預防性維護計劃
表7-1為IMHSS03液壓伺服模塊。下表列出了根據(jù)指定任務分組的先前維護任務維護間隔。表7-1中的一些任務是自解釋的。需要進一步解釋的任務說明如下包含在預防性維護程序中。
FBM215輸出個性模塊注：預防性維護計劃僅適用于一般用途。您的申請可能需要特別注意。檢查HSS模塊和模塊安裝單元是否有灰塵。必要時使用防靜電真空吸塵器進行清潔。3個月
檢查與HSS模塊及其終端裝置或模塊相關的所有信號、電源和接地連接。請參閱步驟。
檢查HSS模塊和相關的終端單元或模塊，特別注意至電源觸點和邊緣連接器。必要時進行清潔。請參閱步驟。12個月校準LVDT和液壓執(zhí)行器。請參閱步驟。根據(jù)需要
完成此表中的所有任務。
Personnel performing preventive maintenance should meet the
following qualifications.
? Maintenance personnel should be qualified electrical technicians or engineers that know the proper use of test equipment and how to handle electronic circuitry.
? Maintenance personnel should know turbine shutdown
and start-up, and plant operating procedures.
PREVENTIVE MAINTENANCE SCHEDULE
Table 7-1 is the preventive maintenance schedule for the
IMHSS03 Hydraulic Servo Module. The table lists the preventive maintenance tasks in groups according to their specified
maintenance interval. Some tasks in Table 7-1 are self explanatory. Instruction for tasks that require further explanation are
covered under PREVENTIVE MAINTENANCE PROCEDURES.
NOTE: The preventive maintenance schedule is for general purposes only. Your application may require special attention.Check the HSS module and module mounting unit for dust. Clean as necessary using an antistatic vacuum.
3 months
Check all signal, power and ground connections associated with the HSS module and its termination unit or module. See procedure.
Inspect the HSS module and associated termination unit or module, giving particular attention
to power supply contacts and edge connectors. Clean as necessary. See procedure.
12 months
Calibrate the LVDT and hydraulic actuator. See procedure. As needed
Complete all tasks in this table.
