WOODWARD 5466-061工控DCS系統
1.產 品 介 紹
品牌：WOODWARD
型號說明：WOODWARD 5466-061工控DCS系統
優勢：供應進口原裝正品，專業停產配件。
公司主營特點：主營產品各種模塊/卡件，控制器，觸摸屏，伺服驅動器。
2.產 品 詳 情 資 料：
WOODWARD 5466-061每個模塊的導電背板連接到金屬DIN導軌，該導軌用作互連設備之間的模塊電子接地導體。這是為了確保模塊的內部邏輯以及EMI抗擾度和RF發射的良好接地連接。DIN安裝導軌必須與機柜的PE有良好的結合。如果AC 800M模塊被配置為兩個或多個與延長電纜互連的組，WOODWARD 5466-061應特別注意確保所有組的DIN導軌與接地連接良好。還要確保固定數字。安裝在金屬板上DIN導軌應每100 mm（4 in）用緊固螺釘牢固地連接到未涂漆的金屬板上，以確保機柜或開放式機架中良好的機械穩定性和良好的底盤接地連接。金屬板厚度至少應為2.5mm，高度至少為180mm。金屬板應至少每隔500 mm用至少WOODWARD 5466-061四個螺釘機械固定在機柜或機架上。機柜框架的緊固應使用自攻螺釘進行，以獲得良好的接地連接。
Each module's conductive back plane connects to the metallic DIN-rail which serves as the module electronics ground conductor between the interconnected devices.WOODWARD 5466-061This is to ensure a good ground connection both for the internal logic and for the EMI immunity and RF emission of the modules. The DIN mounting rail must have a good bond to the PE of the cabinet. If AC 800M modules are configured as two or more groups interconnected with extension cables, special care should be taken to ensure that the DIN-rails of all groups have a good connection to ground. Also ensure to fix the figure numbers. Mounting on metal sheet The DIN-rail shall be firmly attached to an unpainted metal sheet with fastening screws every 100 mm (4 in) to ensure good mechanical stability and a good chassis ground connection in the cabinet or an open rack. The metal sheet shall at least be 2.5 mm thick and at least 180 mm high. The metal sheet shall be mechanical fastened at least every 500 mm to the cabinet or rack with a minimum of four screws. The fastening to the cabinet frame shall be performed with self-tapping screws to get a good grounding connection.WOODWARD 5466-061
3.產 品 展 示
4.公 司 優 勢 主 營 產 品
5.相 關 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.215pk.com
