MOTOROLA 30-W2960B01A模塊卡件
1.產 品 詳 情 資 料：
MOTOROLA 30-W2960B01A是一種控制器卡件模塊
MOTOROLA 30-W2960B01A增加了對消息信號中斷CI中斷線路的電平觸發。這是通過選擇邊緣觸發來獲得優勢的，以在服務共享中斷線時獲得健壯性。PCI規范的后續版本增加了對消息信號中斷的支持
MOTOROLA MVME712A/AM指定了它所實現的功能和寄存器。這類似于I/O讀取，但是從PCI配置空間讀取。只有當?shù)刂返牡?1位指定了它所實現的功能和寄存器，并且特殊的IDSEL信號被置位時，MOTOROLA 30-W2960B01A器件才必須做出響應。它必須忽略高21位。PCI配置空間允許突發讀?。ㄊ褂镁€性遞增）。
MOTOROLA 30-W2960B01A與I/O空間不同，標準PCI配置寄存器的定義使得讀操作永遠不會干擾設備的狀態。設備的配置空間寄存器可能會超過標準的64字節，這會產生讀取副作用，但這種情況很少見。MOTOROLA 30-W2960B01A配置空間訪問通常有幾個周期的延遲，以允許IDSEL線路穩定，這使得它們比其他形式的訪問慢
MOTOROLA 30-W2960B01A is a controller card module
MOTOROLA 30-W2960B01A adds a level trigger for message signal interrupt CI interrupt lines. This is achieved by selecting edge triggers to gain advantage in order to achieve robustness when services share interruption lines. Subsequent versions of the PCI specification have added support for message signal interrupts
MOTOROLA MVME712A/AM specifies the functions and registers it implements. This is similar to an I/O read, but read from the PCI configuration space. The MOTOROLA 30-W2960B01A device must respond only when the lower 11 bits of the address specify the function and register it implements, and the special IDSEL signal is set. It must ignore the high 21 bits. PCI configuration space allows for burst reads (using linear increments).
MOTOROLA 30-W2960B01A differs from I/O space in that the definition of a standard PCI configuration register ensures that read operations never interfere with the state of the device. The device's configuration space register may exceed the standard 64 bytes, which can have a read side effect, but this is rare. MOTOROLA 30-W2960B01A configuration space access typically has several cycles of delay to allow IDSEL lines to stabilize, which makes them slower than other forms of access
2.產 品 展 示
3.公 司 優 勢 主 營 產 品
4. 產 品 展 示
本篇文章出自瑞昌明盛自動化設備有限公司官網，轉載請附上此鏈接:http://www.215pk.com
